基于信息元的教学资源组织系统设计与实现 *

以文本类型教学资源为研究对象,在领域知识可拓信息网模型和CELTS-3的基础上,阐述了基于信息元的教学资源组织系统设计与实现过程,包括信息特征元数据描述框架、特征词获取、信息元距离度量、信息元匹配规则以及匹配算法等.该系统通过有限的信息元描述无限的资源,实现了教学资源的高效组织,支持学习过程中资源自动重组.     

Insoluble Vascular Amyloid Deposits Trigger Disruption of the Neurovascular Unit in Alzheimer’s Disease Brains

Alzheimer’s disease (AD) is a neurodegenerative disease, characterized histopathologically by intra-neuronal tau-related lesions and by the accumulation of amyloid β-peptide (Aβ) in the brain parenchyma and around cerebral blood vessels. According to the vascular hypothesis of AD, an alteration in the neurovascular unit (NVU) could lead to Aβ vascular accumulation and promote neuronal dysfunction, accelerating neurodegeneration and dementia. To date, the effects of insoluble vascular Aβ deposits on the NVU and the blood–brain barrier (BBB) are unknown. In this study, we analyze different Aβ species and their association with the cells that make up the NVU. We evaluated post-mortem AD brain tissue. Multiple immunofluorescence assays were performed against different species of Aβ and the main elements that constitute the NVU. Our results showed that there are insoluble vascular deposits of both full-length and truncated Aβ species. Besides, insoluble aggregates are associated with a decrease in the phenotype of the cellular components that constitute the NVU and with BBB disruption. This approach could help identify new therapeutic targets against key molecules and receptors in the NVU that can prevent the accumulation of vascular fibrillar Aβ in AD.     

Effect of deposition conditions on the properties and annealing behavior of cold-sprayed copper

The deposition of copper by cold gas dynamic spraying has attracted much interest in recent years due to the capability to deposit low-porosity oxide-free coatings. However, it is generally found that as-deposited copper has a signicantly greater hardness, and potentially lower ductility, than bulk material. In this article, copper was deposited by cold spraying using helium as the driving gas at both 298 and 523 K. Evidence is presented indicating that the material sprayed at the lower temperature exhibits a lower dislocation density throughout the grain structure than the material sprayed at the higher temperature. The low stacking fault energy of copper restricts recovery during annealing, and thus microstructural changes during annealing only proceed once recrystallization begins. The material sprayed at low temperature (with the low dislocation density) exhibited recrystallization at annealing temperatures as low as 373 K with a corresponding reduction in hardness. However, the copper sprayed with helium at 523 K was resistant to annealing at temperatures up to 473 K where the dislocations in the structure prevented recrystallization. However, at higher temperatures, recrystallization did proceed (with corresponding reductions in hardness). The fracture behavior of the copper that was cold sprayed with helium at 523 K, both in the as-sprayed condition and following annealing, was measured and explained in terms of the annealing mechanisms proposed. The original version of this paper was published in the CD ROM Thermal Spray Connects: Explore Its Surfacing Potential, International Thermal Spray Conference, sponsored by DVS, ASM International, and HW International Institute of Welding, Basel, Switzerland, May 2–4, 2005, DVS-Verlag GmbH, Düsseldorf, Germany.     

Microstructure evolution of cold-sprayed coating during deposition and through post-spraying heat treatment

The microstructural features of cold-sprayed coatings were investigated using Cu, Ti and Zn feedstocks by optical microscopy, scanning electron microscopy and transmission electron microscopy to reveal the microstructure evolution mechanisms in cold spray. Four typical effects including tamping, refinement, impact-induced fusion and annealing were examined on microstrueture. It is found that the microstructure of cold spray coating is remarkably influenced by spray materials. Ti coatings consist of evident porous layer and Cu coatings present a limited porous layer only near the surface. It is clear that the successive tamping effect and dynamic refinement of grains significantly influence the microstructure evolution of cold-sprayed coating. The tamping effect leads to the densification of porous coating layer gradually and the refinement effect leads to the formation of fine microstructure. It is considered that the large difference in the formation of porous layer is attributed to the dynamic impact pressure and hardenability of materials. It is also found that the impact-induced fusion during deposition of Zn coating can also modify the interfacial microstructure between particles in cold spray coating. Moreover, the nanocrystalline phase can be formed at the interfaces among particles resulting from the localized melting of the interfaces and tamping effect. Furthermore, the annealing treatment can modify the microstructure and property of a cold-sprayed coating.     

地锚拉杆整体抗拉强度损失分析

试验表明冷拔圆钢镶锻及热浸镀锌后整体抗拉强度有所下降，本文对这一现象进行了讨论，认为再结晶退火是其主要原因，在试验验证的基础上，提出了涂油镶锻的生产工艺。     

Interfacial energy and match of cold pressure welded Ag/Ni and Al/Cu

The technology of cold pressure welding was adopted to achieve the bonding of Al/Cu(limited soluble and forming compounds),Ag/Ni(hardly mutual soluble),and the relative state of interface was tested by HREM.The results indicate that stable interface is always corresponding to the low interfacial energy value;the stable interface is not coherent but partly-coherent because of the twisting of grain boundary caused by pressure,meanwhile existing dislocation.Namely,the interfacial match and other states under the condition of cold pressure welding are different from the situation that under the condition of thermal action.Moreover,theoretical analyses and calculation on the base of thermodynamics,crystallogeny ,solid physics etc,were discussed.     

冷弯型钢特点及其生产发展

介绍了冷弯型钢的特点、生产工艺流程及其应用。在阐述分析冷弯型钢国内外生产现状的基础上，探索了它发展的方向。     

冷拔内螺纹管拉拔力的有限元计算方法

本文基于三维弹塑性大变形有限元分析理论,通过对内螺旋凸筋管冷拔成形过程进行有限元仿真,建立增量步与拉拔力的关系,提出了拉拔力的计算方法.经实验验证,理论计算值与实测值相吻合,可为拉拔模具和工艺参数的设计提供参考.     

台阶内花键套筒冷挤压工艺研究

分析了台阶内花键套筒的冷挤压工艺 ,制定出冷挤压件图 ,确定了挤压方案及工艺流程 ,对各工序变形程度进行了校核 ,并计算出了挤压力,同时对挤压模具的设计制造进行了简单的介绍。     

非稳态轧制时轧机振动稳定性的数值分析

利用轧制理论方程和机械振动理论的能量判据 ,给出了一个较精确的分析轧机传动系统扭转振动稳定性的数值计算方法